<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: HTTP Push Data Sensor
The HTTP Push Data sensor displays numeric values from received messages that are pushed via an HTTP request to PRTG. It provides a URL that you can use to push messages to the probe system via HTTP (secured with TLS 1.2 or not secure).
For detailed information about the sensor usage, see section How to Use.
HTTP Push Data Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
Sensor in Other Languages
Dutch: HTTP Push Data
French: Données HTTP Push
German: HTTP Push-Daten
Japanese: HTTP プッシュデータ
Portuguese: Dados de push (HTTP)
Russian: Данные push-объекта HTTP
Simplified Chinese: HTTP 推送数据
Spanish: Datos push (HTTP)
Remarks
If you want to add this sensor to a remote probe and use an HTTPS connection to send push notifications, you must import a Secure Sockets Layer (SSL) certificate into the \cert subfolder of the PRTG program directory on the remote probe. However, this certificate does not have to match the certificate that you use on the PRTG core server. For more information about SSL certificates, see the Paessler website: How to use your own SSL certificate with the PRTG web server
This sensor does not support cluster probes. You can only set it up on local probes or remote probes.
This sensor supports IPv6.
This sensor has a low performance impact.
This sensor might result in false alerts if the parent probe disconnects from the PRTG core server. In this case, the sensor shows the error message: The latest push message that the sensor received is older than the specified time threshold allows. (code: PE222).
You cannot add this sensor to the hosted probe of a PRTG Hosted Monitor instance. If you want to use this sensor, add it to a remote probe device.
If the name contains angle brackets (<>), PRTG replaces them with braces ({}) for security reasons. For more information, see the Knowledge Base: What security features does PRTG include?
This setting is for your information only. You cannot change it.
Tags
Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.
It is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).
For performance reasons, it can take some minutes until you can filter for new tags that you added.
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
pushsensor
pushdata
httppushsensor
Priority
Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority () to the highest priority ().
HTTP Push
HTTP Push
Setting
Description
TLS Settings
Define the security of the incoming HTTP push requests:
HTTP (unsecure): Send push messages to the probe system via HTTP (not secure).
HTTPS low security (TLS 1.0 to 1.3 and weak ciphers): Send push messages to the probe system via HTTPS. The sensor supports connections secured with TLS 1.0 to TLS 1.3 and weak ciphers. It uses the SSL certificate that is delivered with PRTG or your own trusted SSL certificate that you imported for the PRTG web server. If you install the sensor on a remote probe, make sure that you import the same SSL certificates to the remote probe that you use on the PRTG core server.
HTTPS high security (TLS 1.2 to 1.3 and strong ciphers): Send push messages to the probe system via HTTPS. The sensor supports connections secured with TLS 1.2 to TLS 1.3 and strong ciphers. It uses the SSL certificate that is delivered with PRTG or your own trusted SSL certificate that you imported for the PRTG web server. If you install the sensor on a remote probe, make sure that you import the same SSL certificates to the remote probe that you use on the PRTG core server.
You cannot change this value after sensor creation.
Port
This setting is only visible if you select HTTP (unsecure) above.
Enter the number of the port on which this sensor listens for incoming HTTP requests. The default port is 5050.
You cannot change this value after sensor creation.
TLS Port
This setting is only visible if you select HTTPS low security (TLS 1.0 to 1.3 and weak ciphers) or HTTPS high security (TLS 1.2 to 1.3 and strong ciphers) above.
Enter the number of the port on which this sensor listens for incoming HTTPS requests. The default port is 5051.
You cannot change this value after sensor creation.
Request Method
Select the request method of the webhook:
any: Do not use any filter for the request method.
GET: Select this method if the webhook uses GET.
POST: Select this method if the webhook sends POST data. POST data must be form-encoded request bodies with the same parameters as for GET requests.
Identification Token
This is the token that PRTG uses to find the matching sensor for the incoming message. When you create the sensor, this token is {__guid__}.
PRTG replaces this token with an automatically generated token after sensor creation. If you want to use a different identification token, you can edit it during or after sensor creation.
PRTG does not automatically replace the token if you change it already during sensor creation.
Request Handling
Define what PRTG does with the incoming messages:
Discard request: Do not store the pushed messages.
Store result: Store the last message received from the sensor in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Request for Sensor [ID].txt. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.
HTTP Push Data
HTTP Push Data
Setting
Description
No Incoming Data
Define which status the sensor shows if it does not receive a push message for at least two scanning intervals:
Ignore and keep last status (default): Keep the status as defined by the last message that the sensor received. The parent probe must be connected to keep the last status. If the parent probe disconnects, the sensor shows the Unknown status. If the parent probe connects again, the sensor does not automatically switch from the Unknown status to the last status before the parent probe disconnected.
Switch to unknown status: Show the Unknown status if the sensor does not receive a message for at least two scanning intervals.
Switch to down status after x minutes: Show the Down status if the sensor does not receive a message within a specific time span. Define the time threshold below.
Time Threshold (Minutes)
This setting is only visible if you select Switch to down status after x minutes above.
Enter a time threshold in minutes. If this time elapses, the sensor shows the Down status if it does not receive a push message within this time span. Enter an integer. The maximum threshold is 1440 minutes.
Value Type
Define the type of the value of the received data:
Integer
Float (with a dot . between the predecimal position and the decimal places)
If this setting does not match, the sensor shows the Down status.
Sensor Display
Sensor Display
Setting
Description
Primary Channel
Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.
You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type
Define how different channels are shown for this sensor:
Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit
This setting is only visible if you select Stack channels on top of each other above.
Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.
Inherited Settings
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Root Group Settings, section Scanning Interval.
Schedules, Dependencies, and Maintenance Window
You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.
Schedules, Dependencies, and Maintenance Window
For more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.
Access Rights
Access Rights
For more information, see section Root Group Settings, section Access Rights.
How to Use
This function is known as webhook. Basically, a webhook works like a push notification. Webhooks are usually triggered by an event (for example, a new comment on a blog post) and send according information to a specified URL. The HTTP Push Data sensor then displays the data of pushed and received messages.
Replace the parameters <probe_ip>, <port_number>, <token>, and <integer_or_float> with the corresponding values. The &text parameter is optional: You can omit it.
You can define the port number and identification token in the sensor settings.
The probe IP is the IP address of the probe system with this sensor.
The value can be an integer or a float value depending on the data of your application. You must set the value type accordingly in the sensor settings. This parameter is the sensor value. If this parameter is missing, the sensor shows a Downstatus.
You can optionally add a custom text message by replacing the parameter <text message> with your custom text. The text is shown as the sensor message. If there is no value but only a text, the text is shown as an error message. This text message has to be URL encoded (for example, the whitespaces in the sample URL below). Most browsers do URL-encoding automatically.
You can use several sensors with the same port and identification token. In this case, the data of push messages is shown in each of these sensors.
Channel List
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel
Description
Downtime
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
[Value]
The received value and an optional message in one channel